Slim Pipe Clamp On Ultrasonic Flowmeter With Compact Type
I INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular
magnetic steel to achieve automatic connection during
installation.It takes only 2-3 minutes to complete the whole
process from installation to measurement. It also adopts the
current popular OLED display, which makes it easy to read in low
light conditions.
ML-F8 is widely used in the production process for flow measurement
and monitoring. The application of the product continuously and
effectively controls the flow of the fluid, so as to improve the
yield of the product and even save the input of the personnel,
bringing benefits to the production enterprise.
II. FEATURES
- Clamp on type, no need to cut the pipe or do any other changes.
- No professional product knowledge required, installation and
measurement can be done based on the guide.
- No moving parts or pressure changes involved, installation can be
done without stop provide.
III. Working Principle
Ultrasonic flow meters use sound waves at a frequency beyond the
range of hearing (typically 0.5, 1, or 4 MHz). This ultrasound
signal is sent into a stream of flowing liquid by using wetted
(insertion) transducers that make direct contact with the liquid or
external (clamp-on) transducers that send the ultrasound through
the pipe wall. Clamp-on ultrasonic flow meters allow users to
measure the volumetric flow rate of a fluid in a pipe without
having to penetrate the pipe which decreases installation and
maintenance costs.
A typical transit-time ultrasonic liquid flow meter utilizes two
ultrasonic transducers that function as both ultrasonic transmitter
and receiver. The ultrasonic flow meter operates by alternately
transmitting and receiving a burst of ultrasound between the two
transducers by measuring the transit time that it takes for sound
to travel between the two transducers in both directions. The
difference in the transit time (∆ time) measured is directly
proportional to the velocity of the liquid in the pipe.
IV. SPECIFICATION
Model: ML-F8
Velocity Range: 0.1 m/s ~ 5.0 m/s
Accuracy: ± 2.0%
Pipe Size: DN15,DN20,DN25,DN32,DN40,DN50
Data Storage: Daily, Monthly, Yearly Totalizer
Analog output: 4~20mA, Maximum load: 600Ω
Alarm output: OCT, Upper and lower limit alarm function (for
option)
Communication: RS485,support Modbus communication protocol
Power Supply: 24VDC
Cable Length: 1.8m
Keypad: Four light touch buttons
Screen: OLED 128*64 screen display
Units: Metric and imperial units are available
Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA
Gallons(GAL)/min
Default unit setting: m3/h
Totalizer: Six bit digit
Piper Material: Stainless steel pipe, carbon steel pipe, PVC
Case Material: Aluminum alloy
Environment Temp.:0℃-50℃
Medium Temp.:0℃-50℃
IP Grade: IP54
V. PIPE SPECIFICATION
| Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
Nominal Pipe
Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
| Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
| Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
| Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
VI. INSTALLATION STEPS
VII. APPLICATIONS
ML-F8 also satisfies different clean fluid measurements: various
acids, alcohols, chemical solvents,alcohol, beverage water,
Coca-Cola water, etc.
VIII. Company Profile
Melan Measurement & Control Instruments is located in Shanghai
City. It is a high-tech manufacturer specialized in the design,
development, manufacturing and sale of measurement and control
instruments.
Our products are widely used in various fields, including
electricity, chemical industry, metallurgy, brewing, oil and gas,
textile, water conservancy, environmential protection, etc.
We own independent-courtyard modemized manufacturing workshops and
an open office building. Melan has accumlated production and
management experience in instruments from European and American and
domestic famous companies.
We own first-class talent team, and all the products have reached
advanced level at home and abroad. We provide our customers with
complete and professional test control solutions and high-tech and
high-quality products.
Melan is your reliable friend and partner. We are willing to try
our best as dedication and perfection as motivation.
IX. FAQ
Q: How long will you give me the reply?
A: We will contact you in 5 hours as soon as we can.
Q: What is the warranty of your prducts?
A: Our warranty is 12 months after the shipping date.
Q: What is the lead time of your products?
A: Normally our factory lead time is 10-12 working days.
Q: Can I OEM your products?
A: OEM and ODM customization are welcomed.
Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.
Q:What is the transport?
A: Express such as DHL, FedEx, UPS for freight prepaid, and we can
also use your own courier account to do the freight collect. For
more goods we can arrange by air or by sea.
