Multi-language Electro Magnetic Flow Meter with English / Korean /
Polish / Turkish / French / Portuguese
1. Introduction
The MLF electromagnetic flowmeter works according to Faraday's law
of electromagnetic induction and consists of a sensor and a
transducer. Used to measure the conductivity of a liquid or solid.
In general, its conductivity should be greater than 5μS/cm (tap
water, raw water conductivity of about 100 ~ 500μS/cm), can also be
used to measure acid, alkali, salt water, pulp or pulp and other
media. However, these media should not contain large amounts of
magnetic material and air bubbles.
MLF electromagnetic flowmeter is a kind of instrument to measure
liquid fluidity. Widely used in metallurgy, chemical industry,
paper making, environmental protection, petroleum, textile, food,
urban management, water plant and other industries flow
measurement.
2. Quick Details
MLF electromagnetic flowmeter is explosion-proof design.
Function of low conductivity measurement.
There are 9 languages options to meet the needs of different
customers.
Self-regulating function and self-checking.
Different outputs are optional: Hart, RS485,Profibus, 4-20mA,
frequency and pulse.
3. Selection of Liner Material
| Liner Material | Main Performance | Application |
| PTFE | 1. Have the most stable chemical properties in plastic and
resistance to boiling hydrochlor and sulfuric acid, nitric acid
aqua regia, strong alkali, and all kinds of organic solvents, but
can not resist the corrosion of chlorine trifluoride, high
temperature nitrogen trifluoride, liquid fluorine, liquid oxygen
and ozone. 2. Low abrasion resistance. 3. Low negative pressure resistance | 1. -25~140℃ 2. Strong corrosion medium, like strong acid and alkali 3. Healthcare medium |
| CR | Oil proof, solvent resistance, oxidatite resistance and the
resistance to the erosion of common medium like acid, alkali, salt,
etc. | 1. ＜80℃ 2. Be able to measure sewage and mud |
| PU | 1. Very good abrasive resistance, flexibility. 2. Low acid and alkali resistance. | 1. ＜65℃ 2. Neutral strong abrasion resistance medium |
| Hard Rubber | 1. Good resistance to room temperature, hydrochloric acid, acetic
acid, oxalic acid, ammonia, phosphoric acid and 50% sulfuric acid,
sodium hydroxide, potassium hydroxide 2. Avoid strong oxidants | 1. ＜80℃ 2. General acid, alkali, salt solution |
| PFA | 1. Can be used for most corrosive medium like acides, alkalis, and
strong oxidant. 2. High material strength, resistance to aging, better than PTFE,
EFP in high temperature 3. Injection molding for higher negative pressure | 1. 40~180℃ 2. Strong corrosion medium, like strong acid and alkali 3. Healthcare mdium |
| FEP(F46) | 1. Hydrophobicity and non-viscous 2. Corrosion resistance is inferior to PFA 3. Negative pressure | 1. 40~180℃ 2. Strong corrosion medium, like strong acid and alkali 3. Healthcare mdium |
4. Selection of Electrode Materials
| Electrode Material | Main Performance |
| 316L | Good resistance to the corrosion of nitric acid, ＜5% sulfuric acid
under room temperature, acetic acid, alkaline fluid, sulfite under
certain pressure, seawater and scetic acid, etc. It can be widely
used in petrochemical urea, vinylon. |
| Hb | Good resistance to the all the concentration of hydrochloric acid
below the boiling point, also resistance tothe corrosion of
non-oxidizing acid, alkali, salt like sulfuric acid phosphoric acid
hydrofluoric acid, organic acids. |
| Hc | Resistance to the corrosion of oxidizing acids like metric acid,
mixed acid. The mixture of chromium acid and sulfuric acid, and
salts of oxidative, like Fe3+, Q3+, and some other oxidants, like
hypochlorite salt solution higher than normal tmperature and
seawater. |
| Ti | Resistant to corrosion of seawater, various chlorides, hyalphates,
oxidizing acids (including smoke nitric acid), organic acids or
alkalis, but not pure reduced acids (e.g. sulphuric acid,
hydrochloric acid). However, if the acid contains oxidants (e.g.
nitric acid, Fe3, Q3), corrosion resistance is reduced. |
| Ta | Good corrosion resistance similar to glass. Resistance to the
corrosion of chemical medium(including hydrochloric acid and
fumiing sulfuric acid), but can not be used for sodium hydromide
fluid. |
| Pt-Ir | Have good corrosion resistance of all acid, and can be resistance
to the corrosion of alkali, all salt except aqua regia, ammonium
slat and few other medium |
| Tungsten Carbide | For pulp and sewage, good resistance to solid particle
interference. |
5. Dimensional Sketches
a. Dimension of Converter
Divided Type
Integrated Type
Battery Powered Type
b. Dimension of Sensor
| Pipeline Diameter | Dimension |
| L | W | H |
| 15 | 160 | 95 | 130 |
| 20 | 160 | 105 | 137 |
| 25 | 160 | 115 | 150 |
| 32 | 160 | 135 | 160 |
| 40 | 200 | 145 | 175 |
| 50 | 200 | 160 | 185 |
| 65 | 200 | 180 | 205 |
| 80 | 200 | 195 | 215 |
| 100 | 250 | 215 | 235 |
| 125 | 250 | 245 | 275 |
| 150 | 300 | 280 | 300 |
| 200 | 350 | 335 | 355 |
| 250 | 400 | 400 | 405 |
| 300 | 500 | 455 | 460 |
| 350 | 500 | 515 | 520 |
| 400 | 600 | 575 | 580 |
| 450 | 600 | 635 | 630 |
| 500 | 600 | 710 | 685 |
| 600 | 600 | 835 | 795 |
| 700 | 700 | 905 | 910 |
| 800 | 800 | 1020 | 1030 |
| 900 | 900 | 1120 | 1120 |
| 1000 | 1000 | 1245 | 1250 |
| 1200 | 1200 | 1465 | 1470 |
6. Instrument Detection & Maintenance
The electromagnetic flowmeter has a self-diagnostic function. In
addition to power supply and hardware circuit failures, the system
also alarms other failures in general use. These messages will give
corresponding prompts in the lower right corner of the screen.
1 Maintenance and repair
a) The sensor installation site should meet the requirements of
Section 4, please keep the housing tidy;
b) The transmitter should be placed in a clean, ventilated and dry
place;
c) It needs to be inspected every two years. For high-precision
users, the instrument needs to be submitted for review.
2 Transportation and storage
a) The instrument must be packaged before transportation, and be
handled with care when loading and unloading.
b) The storage place must be dry and ventilated to avoid corrosive
gases, and the ambient temperature should not be too low or too
high;
c) The storage time should not exceed three years.
3. Unpacking inspection
a) The package cannot be opened with a heavy hammer, be careful not
to damage the instrument
b) Check the contents carefully according to the packing list.
7. Product Photos
