0.2% Accuracy Smart Turbine Mass Flow Meter DN25 For Liquid Easy
Installation
1. Introduction
LWGYML series intelligent liquid turbine flowmeter is a new
intelligent instrument which is developed by using advanced
ultra-low power monolithic microcomputer technology and integrates
turbine flow sensor with display and integration. It has obvious
advantages such as compact structure, intuitive and clear reading,
high reliability, no interference from external power supply,
lightning resistance and low cost.
2. Features
- High accuracy, usually reach ±1%R,±0.5%R,or even reach ±0.2%R for
high-precision type.
- Good repeatability, it can reach 0.05%-0.2% in short term, if
regular calibration or online calibration can get an extremely high
accuracy, so it is preferred in foreign trade.
- Pulse signal output, it is suitable for totalizer measurement and
computer connection, no zero drift,strong capacity of resisting
disturbance.
- High frequency signal(3-4KHz), strong signal resolution.
- Wide range, middle and big diameter can reach 1:20, and small
diameter can reach 1:10.
- Compact structure, easy installation and maintenance.
3. Application
Turbine flowmeter is widely used in the following measurement
objects: petroleum, organic liquid, inorganic liquid, liquefied
gas, natural gas, coal gas and cryogenic fluid. In foreign
countries, liquefied petroleum gas, refined oil and light crude oil
are used for trade settlement in the first and last stations of
large crude oil pipelines. In Europe and the United States, turbine
flowmeter is second only to orifice flowmeter, while in the
Netherlands alone, more than 2,600 turbine flowmeters with various
sizes and pressures ranging from 0.8MPa to 6.5MPa have been used in
natural gas pipelines, and they have become excellent natural gas
flowmeters. Although the excellent metering characteristics of
turbine flowmeter are favored by people, it gives people the
impression that it is made up of moving parts and has a short
service life, so it is inevitable to hesitate when choosing them.
After people's unremitting efforts, it should be said that the
situation has changed greatly. As the most universal flowmeter, the
turbine flowmeter has developed into a mass production scale with
multiple varieties, full series and multiple specifications.
Turbine flowmeter is widely used in some special departments
besides the aforementioned industrial departments, such as
scientific research and experiment, national defense science and
technology, and metering departments. The use of these fields just
avoids its weakness (not suitable for long-term continuous use) and
gives full play to its characteristics (high precision, good
repeatability, and can be used in high pressure, high temperature,
low temperature and micro-flow conditions). In these fields, most
of them are designed according to the special requirements of the
measured objects, and they are special instruments without mass
production.
4. Specifications
Pipeline Diameter(mm)
and
Connection | 4,6,10,15,20,25,32,40
Thread Connection |
(15,20,25,32,40) 50,65,80,100,125,150,200
Flange Connection |
| Accuracy | ±1%R,±0.5%R,±0.2%R(Special Order) |
| Turn Down Ratio | 10:1; 15:1; 20:1 |
| Material | 304SS,316(L)SS, etc |
| Medium Temperature | -20℃~+110℃ |
| Environmental Conditions | Temperature: -10℃~+55℃
Relative humidity: 5%~90%
Atmospheric pressure: 86~106KPa |
| Power supply | Sensor:+12VDC,+24VDC(Option)
Transmitter:+24VDC
Local Display:3.2V Lithium Battery |
| Output Signal | Sensor:Pulse Frequency Signal(Low level≤0.8V, High level≥8V)
Transmitter:Two Wired 4-20mA Current Signal |
| Signal Cable | STVPV 3x0.3(Three Wired),2x0.3(Two Wired) |
| Signal Cable Connection | Houseman Connector(Standard Type)
Inner Thread M20x1.5(Explosion Type) |
| Transmission Distance | ≤1000m |
| Explosion Proof | None(Standard Type)
EXdIIBT6(Explosion Proof) |
| Protection Class | IP65 |
5. Installation Dimension
According to the diameter, choose thread or flange connection to
install the senor. As to installation method, please check Pic4,
Pic5, Pic6.
Pic4 LWGYML-4~10 Structure & Installation Dimension Diagram
Pic5 LWGYML-15~40 Structure & Installation Dimension Diagram
Pic6 LWGYML-50~200 Structure & Installation Dimension Diagram
| Pipeline Diameter | L | Thread Connection | Flange Connection |
| (mm) | G | D
(mm) | d
(mm) | n |
| DN4 | 295 | G1/2 | | | |
| DN6 | 330 | G1/2 | | | |
| DN10 | 450 | G1/2 | | | |
| DN15 | 75 | G1 | θ65 | θ14 | 4 |
| DN20 | 80 | G1 | θ75 | θ14 | 4 |
| DN25 | 100 | G1-1/4 | θ85 | θ14 | 4 |
| DN32 | 120 | G2 | θ100 | θ14 | 4 |
| DN40 | 140 | G2 | θ110 | θ18 | 4 |
| DN50 | 150 | | θ125 | θ18 | 4 |
| DN65 | 170 | | θ145 | θ18 | 4 |
| DN80 | 200 | | θ160 | θ18 | 8 |
| DN100 | 220 | | θ180 | θ18 | 8 |
| DN125 | 250 | | θ210 | θ25 | 8 |
| DN150 | 300 | | θ250 | θ25 | 8 |
| DN200 | 360 | | θ295 | θ25 | 12 |
6. Configuration
| LWGYML Series Turbine Flow Meter Configuration |
| Model | LWGYML |
| Pipe Material | 4 | 4mm |
| 6 | 6mm |
| 10 | 10mm |
| ...... | |
| 200 | 200mm |
| Model Description | N | No Display,12VDC Power Supply,Pulse Output, High Level≥8V Low
Level≤0.8V |
| A | No Display,4-20mA 2 Wired Current Output |
| B | Local Display,Battery Operated |
| C | Local Display,4-20mA 2 Wired Current Output |
| C1 | Local Display,RS485 Output |
| C2 | Local Display, HART Output |
| Accuracy | 05 | 0.5 Grade |
| 10 | 1.0 Grade |
| Turbine Type | W | Extended Ratio |
| S | Standard Ratio |
| Material | S | SS 304 |
| I | SS 316(L) |
| Explosion Proof | N | None |
| E | Explosion Type(ExmIICT6 or ExdIIBT6) |
| Pressure Rate | N | Normal Pressure |
| H | High Pressure |
| Connection Type | T | Thread Connection |
| F | Flange Connection |
| Filter | N | None |
| F | With Filter |
7. Details
