Type | Specification Code | Illustration |
ML2¨¨¨A | --------------------------------- | Pressure Transmitter |
Transducer | 0-------------------------------- | Diffused Silicon Transducer |
Accuracy | 8-------------------------------- | ±0.5% |
Output | C-------------------------------- | 4-20mA |
G-------------------------------- | Other Requirements,Contact Us. |
| A-------------------------------- | |
Contact Medium Mode | G-------------------------------- | High Temperature Heat Radiation Type(0-200℃) |
P-------------------------------- | Flat Diaghragm Contact Type |
L-------------------------------- | Thread Connection * |
Connection Mode | K-------------------------------- | Clamp Connection |
M-------------------------------- | M20x1.5 * |
Q-------------------------------- | Other Thread Connection (Note 1) |
Measuring Range | 1-------------------------------- | 0-5~35KPa |
2-------------------------------- | 0-35~100KPa |
3-------------------------------- | 0-50~200KPa |
4-------------------------------- | 0-100~350KPa |
5-------------------------------- | 0-200~700KPa |
6-------------------------------- | 0-0.5~2.1MPa |
7-------------------------------- | 0-1~3.5MPa |
8-------------------------------- | 0-3~7MPa |
9-------------------------------- | 0-7~21MPa |
0-------------------------------- | 0-15~40MPa |
Y-------------------------------- | Specific Range |
Display Header | L-------------------------------- | Common LED Header |
Z-------------------------------- | Pointer Header |
N-------------------------------- | No Header * |
Electrical Connection | 5-------------------------------- | M20x1.5 Waterproof Concentrator |
Power Supply | -A-------------------------------- | 24VDC |
-B-------------------------------- | 12VDC |
Additional Type | -NF1---------------------------- | Ex-proof Certificate: Exd II CT6 |
-NS1---------------------------- | Intrinsic Safety Type: Exi II CT4 |
-M-------------------------------- | Other Requirements (Note2) |
Remarks: | | |
e.g.:ML208CALM6N-A-NF1 0-1.6MPa |
Note1: Please indicate the thread size behind type if you choose
this code |
Note2: Please note in order |
*: Standard | | |